Introduzione
Use this guide to replace the drain pan in your Whirlpool WRS315SDHW Refrigerator.
The drain pan collects water from the defrost drain that eventually gets evaporated by the condenser. If your refrigerator is leaking water onto the floor, your drain pan might be bent or broken.
Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.
-
-
Use a 1/4 inch socket wrench, or a flathead screwdriver, to remove the seven 16.2 mm-long screws securing the rear panel.
-
Use a 1/4 inch socket wrench to loosen the screw securing the water hose enough for the rear panel to freely move.
-
-
-
Use a flathead screwdriver, or a similar tool, to pry up the metal clip from the back of the drain pan.
-
-
-
Use your fingers to release the metal clip on the front of the drain pan.
-
Fold the metal clip so that it lays flat on the floor of the chassis.
-
-
-
Pull the drain pan toward the front of the chassis to release any remaining clips.
-
Remove the drain pan.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
