WRS315SDHW Wiring Harness Replacement

Scritto Da: nicO
  • Commenti: 0
WRS315SDHW Wiring Harness Replacement

Difficoltà

Moderate

Passi

3

Tempo Necessario

Nessuna stima

Introduzione

  1. hwKaSwUnEHNyjbcH

    • Use a 1/4 inch socket wrench to remove the 16.7 mm-long screw securing the wiring harness.

  2. nPwlOCOWqbIMRZWf
    nPwlOCOWqbIMRZWf
    pfOyh4LaZoj2wkwN

    • Pull the wiring harness out of its slot in the chassis to access its connectors.

  3. GpRPuHHpt1FxH5En
    GpRPuHHpt1FxH5En
    QitYlbnajsT1jXnc
    DmNXsYlTpWPBTaJw

    • Disconnect the two connectors attached to the door wiring harness.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

nicO

Membro da: 14/04/15

15885 Reputazione

0 commenti