Whirlpool Dryer Power Cord Replacement

Scritto Da: Bill Gilbert
  • Commenti: 0
Whirlpool Dryer Power Cord Replacement

Difficoltà

Easy

Passi

5

Tempo Necessario

15 - 30 minuti

Introduzione

Use this guide to change the power cord on your Whirlpool Dryer. This guide is intended for electric dryers.

Sometimes the power cord can get pinched or damaged and need to be replaced, and this guide will get you through it.

This guide will work for most Whirlpool electric dryers. This guide is written with a model WED87HED dryer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

  1. cRUlfkgf2YwoDST3

    • Before you begin your repair, unplug your dryer.

    • Your power cord may have four prongs rather than three. The additional prong is a ground connection.

  2. iFHOna1BIyCioX1h

    • Remove the cover plate screw.

  3. ATYQk5mB24lA3KPa
    ATYQk5mB24lA3KPa
    KeXHKQ4qTAEJrFBL
    MqMWNbLMQumnVG2d

    • Remove the cover plate.

  4. RvZLHJnHwNREikkH

    • Remove the screws securing the cord cables.

    • Mark the cables with a permanent marker if needed and take a picture or draw a diagram.

  5. XNtNBvTWyff5sjCS
    XNtNBvTWyff5sjCS
    iujv6sMmTmTOLdNM
    4NTgnK4UBNPllnpK

    • Pull the cord carefully down through the round hole.

    • Make sure you replace the connections correctly when you reassemble.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Ask our Answers community for help.

Autore

Bill Gilbert

Membro da: 30/06/22

29837 Reputazione

0 commenti