Introduzione
This guide has only a few simple steps to get to the microphone. However, soldering is required to fully detach the microphone from the headset and install a replacement. Please refer to the soldering technique guide for instructions on soldering and desoldering.
Strumenti
- 
                  
                  
- 
            
Lift the joint of the boom up and over its pivot point to separate the microphone from the headset.
 
 - 
            
 - 
                  
                  
- 
            
Using the flat end of the plastic spudger, gently pry the microphone out of its casing.
 - 
            
Desolder the two wires from the back of the microphone. For instructions on how to solder and desolder, please see the soldering technique guide.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.
9 commenti
Is a replacement microphone available from iFixit?
What do you replace the mic with?
Its Me -
They have the microphone for sale