iMac Intel 21.5" EMC 2308 CPU Fan Replacement

Scritto Da: Walter Galan
  • Commenti: 0
iMac Intel 21.5" EMC 2308 CPU Fan Replacement

Difficoltà

Difficult

Passi

5

Tempo Necessario

Nessuna stima

Introduzione

This guide is an internal prerequisite that should remain unpublished.

  1. C5yVc4UrQkKZvBtW

    • If present, remove the pieces of clear tape securing the ambient temperature sensor cable and the left speaker cable to the rear case.

  2. msfli5GAsw6HR2aA

    • Remove the two 13 mm T10 Torx screws securing the CPU fan to the outer case.

  3. hjQmDWPmymLJOYN1

    • Peel the cable retainer off the side of the CPU fan.

    • If the tape on the cable retainer loses adhesion, remove the existing foam tape and either use double-sided tape or glue to reattach it to the CPU fan.

    • Remove the CPU fan from the outer case, minding any cables that may get caught.

  4. taWnXCANwQVL2iSw

    • De-route the left speaker cable from the clips securing it to the outer case.

  5. JgAEQ44iL4MWuDCH
    JgAEQ44iL4MWuDCH
    SIjXGDTA6oH5BWbC

    • Carefully remove the left speaker and ambient temperature sensor cables from the CPU fan cable retainer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Walter Galan

693762 Reputazione

0 commenti