iPad Mini CDMA Small Metal Bracket Replacement

Scritto Da: Walter Galan
  • Commenti: 0
iPad Mini CDMA Small Metal Bracket Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

Nessuna stima

Introduzione

Prereq for removing logic board with no battery.

  1. COvnMCnaQVjoPi4c
    COvnMCnaQVjoPi4c
    wDy2YUwwARrUPICL
    WYVr5IKDFYYGqJYt

    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.

  2. 4TLoYBvsSelECggQ
    4TLoYBvsSelECggQ
    eG5nOJHnCroeIkqJ

    • Use a plastic opening tool to push the bracket slightly to the left.

  3. 64fXI2CkX5nSvN2t
    64fXI2CkX5nSvN2t
    5hh1SPB5FQXbi4T2

    • Use a spudger tip to lift up the lower side of the bracket.

  4. a1NkGGoM3RrLxJ4T
    a1NkGGoM3RrLxJ4T
    j4oxLgebtUlHFu2T

    • Remove the bracket with tweezers.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Walter Galan

693768 Reputazione

0 commenti