iPad mini 4 LTE Upper Component Bracket Replacement

Scritto Da: Evan Noronha
  • Commenti: 0
iPad mini 4 LTE Upper Component Bracket Replacement

Difficoltà

Difficult

Passi

4

Tempo Necessario

Nessuna stima

Introduzione

Prerequisite guide for accessing upper components in an iPad mini 4 LTE.

  1. TYUmTfUcZC5B3q5v
    TYUmTfUcZC5B3q5v
    DVnLXDjiZBuhLYRM

    • Run the pointed end of a spudger between the looped tape and the plastic cellular antenna housing to make it easier to peel the tape up.

  2. RG3OfjIORD6swWal
    RG3OfjIORD6swWal
    WCcNXh1GkyVFexbo
    hJFhXAFpDwEwCEDI

    • Use tweezers to peel up the looped tape adhered over the upper component cable bracket.

  3. Rr5SvyPQ2W4EuM2a

    • Remove the following four Phillips screws holding the upper component bracket in place:

    • Two 2.1 mm screws

    • Two 1.2 mm screws

  4. Bd4PU66SdK5LmxoC

    • Remove the upper component cable bracket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Evan Noronha

Membro da: 06/02/15

223184 Reputazione

0 commenti