iRobot Roomba 805 Wheel Replacement

Scritto Da: Grady Landers
  • Commenti: 0
iRobot Roomba 805 Wheel Replacement

Difficoltà

Easy

Passi

2

Tempo Necessario

4 minuti

Introduzione

This guide will go over how to clean or replace the wheels in your iRobot Roomba 805. If you plan on replacing either wheel you can get a new one from iRobot. A Phillips head screwdriver is needed to follow this guide.

  1. k6HpFylnQ15DIMwI
    k6HpFylnQ15DIMwI
    3fdfA1GAOoVTPicU

    • Remove the battery panel, then remove the two screws behind the wheels, and lift the bottom panel apart from the rest of the device.

  2. XIYfNWm1jPUkYn2o
    XIYfNWm1jPUkYn2o
    un1sJwyAtXWd2MjW
    KnRIrBbwqNSpgtQG

    • Remove the three screws holding the wheel to the chassis and pull it out.

    • Keep in mind the two wheels are symmetrical, so you can follow these steps for either.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Grady Landers

Membro da: 05/11/19

617 Reputazione

0 commenti