iRobot Roomba 860 Side Brush Replacement

Scritto Da: Ryan Murphy
  • Commenti: 1
iRobot Roomba 860 Side Brush Replacement

Difficoltà

Easy

Passi

3

Tempo Necessario

55 secondi

Introduzione

This guide will provide instructions to replace the side brush that directs debris and contaminants towards the debris extractor to be picked up.

  1. wcveCmmEBrG4tCbp

    • Start by locating the yellow side brush on the underside of the iRobot Roomba 860 near the front of the device.

  2. asIGqDnLDGEW6DbI

    • Using a Philips #2 Point Screwdriver, remove the screw located in the center of the brush.

  3. fAHb2SmKycLpIH6I
    fAHb2SmKycLpIH6I
    kSNHW61C2DnXRxIJ

    • Pull up on the side brush and it should slide off, free of the motor shaft.

    • Remove any debris that could be preventing the side brush from spinning and/or replace the side brush.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Ryan Murphy

Membro da: 03/03/17

446 Reputazione

Un commento

What to do if the screw head is broken off? Thanks

Linda -