Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement

Scritto Da: A. Lithia
  • Commenti: 0
Sony DPTA-RS1 Active Stylus Teardown & Battery Replacement

Difficoltà

Moderate

Passi

4

Tempo Necessario

1 ora

Introduzione

Tearing down my DPTA-RS1 stylus and replacing the dead li-ion battery without damaging the cosmetics.

Ricambi

  1. kRCulBlS3LCHGEm1
    kRCulBlS3LCHGEm1
    6BRY3EwbyPpEcj5A

    • The tip is glued-in-place. You need to wiggle it with force to loosen the glue.

    • Do not use clamps or pliers to hold the tip. You may risk damaging the capacitive coil underneath.

  2. YhmuIlCYCXquPLOg

    • The internals are now held in place by the plastic buttons. Remove them to proceed

    • Use a prying tool to remove the buttons. The middle pivot is a good entry point.

  3. 2OehBsjkO4UClUjq

    • With the buttons removed, you can now slide out the guts in the tip's direction. You can now perform a battery replacement.

  4. TQRBldhOMCLZiVBw

    • Apparently, the pen is built by Hanvon and is powered by ATMEL's (now Microchip's) maXStylus Technology.

    • ATMEL maXStylus mXTS220 Capacitive Stylus Driver

    • TI BQ24232RGTR Li-ion Battery Charger

Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

A. Lithia

Membro da: 23/03/23

109 Reputazione

0 commenti