Dell Inspiron 13 7378 Heat Sink Replacement

Written By: Javier Perez
  • Comments: 0
Dell Inspiron 13 7378 Heat Sink Replacement

Difficulty

Moderate

Steps

6

Time Required

15 - 30 minutes

Introduction

The Dell Inspiron 13 7378 is a widely used laptop model, however, it is not immune to technical issues. One of the most prevalent problems faced by this device is CPU overheating. To mitigate this issue, it is crucial to replace the cooling system and prevent any harm to the internal components of the laptop. This guide will provide you with step-by-step instructions on how to perform this maintenance procedure in a professional manner.

  1. YSThvhlDvFlUIs23

    • Set the laptop with its underside facing up for improved accessibility.

  2. bX2UP2QbRaHV56mX
    bX2UP2QbRaHV56mX
    pRYSrOXthag5FHVo

    • Using a Phillips #00 screwdriver, extract the nine 3 mm screws located on the back of the laptop.

  3. ec4l52CDiXNH4NAV
    ec4l52CDiXNH4NAV
    eDVIQqqonG1x6LLh
    SUHIumXpihFraCMq

    • Carefully pry open the back of the back of the laptop using opening picks.

    • Carefully raise and detach the back cover from the laptop.

    • Exercise caution to prevent damaging or cracking the device's back cover.

  4. JeItNg6RBkGAAHbi

    • Carefully remove the four screws securing the heat sink by using a Phillips screwdriver.

  5. 4HMRmJN4HxaZC1Yq
    4HMRmJN4HxaZC1Yq
    NQv2BhffvXyOKRjT

    • Check to see if the fan will obstruct the removal process and if so, remove the fan first before removing the heat sink to prevent any damage.

    • In the absence of any obstacles impeding the removal process, gently lift and extract the heat sink from its position.

  6. kMdXuPnc21LbeTwt

    • Before you install a new compatible cooling system, place a fresh coat of thermal paste in the center of where the previous cooling system used to be.

Conclusion

Replace the back cover to complete the process.

Author

Javier Perez

Member since: 08/02/22

259 Reputation

0 comments