Introduzione
This guide will help you successfully remove the microphone out of your Acer Chromebook Spin 15 CP315-1H-P1K8. If the microphone component for this laptop is not functioning, use this guide to properly remove the faulty microphone for replacing.
Strumenti
- 
                  
                  
- 
            
Flip the computer over so that the back is facing up.
 - 
            
Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.
 
 - 
            
 - 
                  
                  
- 
            
Unplug the camera/microphone ribbon cable from the circuit board.
 - 
            
Remove the single 3mm Phillips #1 screw from the Intel core.
 - 
            
Unplug the cable from the circuit board.
 
 - 
            
 - 
                  
                  
- 
            
Use the plastic opening tool, create a gap between the back and front of the display.
 - 
            
Lift the front out with your hands.
 
 - 
            
 - 
                  
                  
- 
            
Remove the two 3 mm Phillips #1 black screws from the microphone at the top of the display cover.
 
 - 
            
 - 
                  
                  
- 
            
Remove the microphone component from the rest of the computer by detaching the connected wire.
 - 
            
The camera component of the laptop is connected to the same wire, so remove this as well.
 
 - 
            
 - 
                  
                  
- 
            
Remove the microphone and camera wire out from around the display screen.
 - 
            
Remove the ribbon cable at the bottom of the display screen to completely free the wire.
 - 
            
Carefully remove the adhesive tape and take out the ribbon cable.
 
 - 
            
 
To reassemble your device, follow these instructions in reverse order.
Some of the screws are long and some are short - make sure you not which came out of which hold.
Thomas Krauska -
As always, I would recommend that you remember exactly where you remove the screws from, on this particular model, we did not see that the screws were different lengths. I would recommend sorting them in a pattern that is familiar, such as clockwise or counterclockwise. This way when replacing the screws you know exactly the order to put them back in.
Evan Costa -