Introduzione

Prima di iniziare, assicurati che il dispositivo sia spento. Lo schermo e il digitizer verrà via come una sola unità.

  1. pMUsf5gRYMNi2hgC
    pMUsf5gRYMNi2hgC
    RDROMVPXqogIgTOT
    J2ufhOZpVSFQKTKJ
    • Evita di fare leva vicino al bordo inferiore destro per via del connettore dell'LCD.

    • Usa uno strumento di apertura in plastica per sollevare lo schermo per sollevare lo schermo nell'angolo a destra.

    The right side with the power switch on top?

    Sonny Shear -

    Where is the right hand corner? Is it the corner nearest the USB connector? Farthest from USB connector?

    Thanks!

    Steve Ciciora -

  2. lTqFQgEFiHSNgYWJ
    • Non rimuovere ancora completamente lo schermo, in quanto c'è un connettore ZIF collegato.

    • Solleva lo schermo e il digitizer dalla copertura.

    • Potresti dover fare un po' di forza a causa della colla.

    What is a ZIP connector? What does it look like?

    Beldenr -

    Hi Beldenr! We happen to have a handy guide for a lot of different types of connectors, including ZIF connectors.

    Adam O'Camb -

  3. 3xBWtELWfcZnMODd
    3xBWtELWfcZnMODd
    6EwvG6oFoBRvcsxI
    • Stai attento al connettore ZIF.

    • Scollega il connettore del cavo a nastro dal digitizer usando le mani o lo strumento di apertura in plastica.

  4. 3H6ELaVaCoPLtFTQ
    • Rimuovi completamente lo schermo e il digitizer dalla copertura.

Conclusione

Per rimontare il tuo dispositivo, segui le istruzioni in ordine inverso.

Jaie Hillery

Membro da: 07/10/14

1718 Reputazione

16 commenti

Where can you get a replacement digitizer screen? My grandson dropped his a couple days ago & I don't want to spend another $200 for a new one.

misterh -

I am seeing replacement screen/digitizers for these now on ebay. With a little searching around I found one direct ship from Hong Kong for $70US. Good Luck!

Greg Charland -

I can't seem the find a replacement screen for this specification anywhere

Stephanie Eyime -

I need the the cable that goes to the sceen. As i changed out my battery, when i tried to carefully remove the zif connector, it broke off. Woe is me.

boumpanimusic -

What is needed to attach the screen back to the case?

Jimmy Lee -

I think you just snap it on. Not sure, I haven’t fixed mine yet.

[deleted] -

what best double sided tape for kindle hd 10 digitizer repair?

carl schnitzer -

Cheaper to buy a new one and keep the broken one in the car or garage.

Francisco Garay -

This is true. Going forward, I’d recommend getting the kid’s edition no matter what. It is a great insurance policy. Amazon honors their warranty nicely…

Daniel Jacobovitz -

Does anybody know if the 2017 model uses the same screen and/or digitizer as the 2015 model?

bhicks0316 -

That is only the glass, and not the LCD… This guide doesn’t include the steps to separate the glass from the LCD assembly…

Daniel Jacobovitz -

This did not work for me. I wonder if it changed in newer models ? I pried it open on the side, then the whole back cover came off. It was impossible to separate the glass from the rest without breaking it all. Wonder what I did wrong.

Lennart Pascal Tarris -

Extremely simple and very well documented. Thank you for making the replacement less difficult. Just one question, how do you get the plastic tool to fit in between the screen and the frame? Mine wore out trying to scrape and push its way in there

Joseph Richard -

Too bad the cost of the part is so high.

Charles Woznak -

Anyone try using this screen in other projects? I am looking for an adapter for the ribbon cable to HDMI or DPSI

Joe Steele -