Introduzione

Se, quando premi i tasti, non succede nulla, potresti avere la tastiera guasta. Per sostituirla, segui questa guida.

  1. iaTSuQ65o5eYyMRP
    • Gira il lato inferiore dell'IdeaPad verso l'alto.

    • Utilizzando un cacciavite Phillips #1, rimuovi le due viti da 6,0 mm sul pannello posteriore, che tengono la tastiera.

    • Gira nuovamente il computer a testa in sù.

  2. MWgAEW1RNUuDyE1A
    • Apri il coperchio.

    • Usa un attrezzo di apertura in plastica per far leva sotto la tastiera e quindi staccarla dalla scocca.

    There’s a screw which is fixed behind the laptop which is fixed to keyboard.

    So first remove all screws on the back panel in step 5.

    Suyama Madushan -

    There are actually 2 screws on the bottom of the laptop that secure the keyboard. Removing all screws from the bottom of the laptop is still the best thing to do before beginning.

    Michael Wiseman -

  3. EwNM66JTmlCoEEBO
    • Ora disconnetti il cavo della tastiera usando l'estremità a punta di uno spudger o un dito per spingere dolcemente il cavo a nastro fuori dal suo zoccolo.

    • Rimuovi completamente la tastiera dalla scocca.

    Die zwei Schrauben auf der Unterseite müssen vorher gelöst werden. Wer dieser Anleitung folgt, bekommt die Tastatur zwar mit Gewalt raus, hat aber dann sie von der verschraubten Halterung abgerissen.

    schiller -

    Danke! Ich hab’s angepasst!

    Fabian Neidhardt -

    Do not pull on the cable. This is a ZIF connector. You will have to unlock the connector before pulling or prying on the cable. Click on the link for instructions on unlocking ZIF connectors .

    Riconoscimento e scollegamento dei connettori dei cavi

    Jeff Moore -

    • Sblocca il connettore ZIF prima di tirare il cavo fuori.

Conclusione

Per rimontare il tuo dispositivo, segui queste istruzioni in ordine inverso.

Tyler

Membro da: 17/10/18

597 Reputazione

0 commenti