Ryobi D620H

The Ryobi D620H is a variable-speed drill with dual functionality, also serving as a rotary hammer. The D620H was released in 2014, weighs 5.1 lbs, and is approximately 12 x 10 x 3.5 inches. It has a 1/2-inch keyed chuck and a ball-bearing construction for increased durability. An auxiliary handle for enhanced portability and a sizable, top-sliding button for selecting between mallet and drill modes are also included.

This device is extremely simple to disassemble, and repairs are straightforward. By simply removing the top shell of the device, you have access to almost every internal component of the drill.

Parts are available directly from Ryobi as well as other parts retailers.

No current or documented recall of the Ryobi D620H device has been recorded.

Looking at the side of the case without the title badge, there is a specification sticker starting with the model number which is identified as D620H. The drill must be corded, have a chuck that requires a key, and a forward/reverse switch right above the trigger.

• D620H
• 6.2 Amp Motor
• 1/2" Chuck
• Variable Speed & Reverse
• Drill and Rotary Hammer Functionality
• 120V
• 60Hz
• 0-43000 BPM

The operator's manual and repair sheet can be found on the official Ryobi website or attached under the Documents section of this page.

Further links that may be utilized to disassemble and recondition the drill from YouTuber creator: Ray Fixes All.

The Ryobi D620H on Amazon has customer reviews and specs.